Hurry up and self check! Have you installed the gas alarm correctly in your home

With the frequent occurrence of gas accidents, the lesson of blood and fire has repeatedly taught us that if gas is not used properly, it may leak, cause fires, and even explosions, seriously threatening people's life safety. We must remember the safety of gas use in our daily lives, and it is necessary to install home gas leakage alarms! But do you know the correct installation method?

Selection of installation location for home gas leakage alarm
Home gas leakage alarms used by residents are generally independent, economical, practical, and easy to install. When the concentration of combustible gases and incomplete combustion gases in the air of the tested area reaches the alarm set value, an audible and visual alarm signal will be emitted.

Taking the independent home gas leakage alarm as an example, the installation position should be more than 0.5 meters away from the horizontal net distance of the stove and exhaust outlet, and should not be installed directly above the gas appliance to avoid false alarms caused by oil smoke. At the same time, avoid approaching water facilities such as washing sinks and dishwashers, and ensure that there are no cabinet doors or other obstructions in front of them.

The installation of different gas sources also requires attention:

1. If natural gas or artificial gas is used, it should be installed on the ceiling or on the wall within 0.3 meters from the ceiling.

2. For those using liquefied gas, it should be installed on a wall not higher than 0.3 meters from the ground.

Attention for installation and use of home gas leakage alarm:
The alarm equipment should comply with the current national standards and pass the inspection of relevant national product quality supervision and testing units, and obtain corresponding national licenses or recognition. Therefore, users should purchase qualified products through legitimate channels to ensure the long-term stable performance of the alarm.

1. After installation, the power on indicator light of the alarm is green and visually clear.

2. It should be kept in a continuous power supply state and not disconnected midway.

3. The alarm concentration and response time have been calibrated before leaving the factory and do not require user adjustment.

4. Remember, thehome gas leakage alarm must be powered on!!!