Installation location of smart smoke and co detector

Installation location of household smart smoke and co detector: The detector should be installed in a place where gas is easy to leak, and the specific location should be determined according to the specific gravity of the detected gas relative to the air. When the specific gravity of the gas to be detected is greater than that of air, the detector should be installed at a distance of (30-90) cm from the ground, with the sensor part facing downwards. When the specific gravity of the gas to be detected is less than that of air, the detector should be installed at a distance of (30-90) cm from the ceiling, with the sensor part facing downwards.

In order to use the detector correctly and prevent the occurrence of detector failure, please do not install it in the following locations:
1. Places directly affected by steam and oil fume;
2. Air supply ports, ventilation fans, doors and other places with large air flow;
3. Places with many water vapor and water droplets (relative humidity: ≥90%RH);
4. The temperature is below -40℃ or above 55℃;
5. Places with strong electromagnetic fields.

When installing the smart smoke and co detector, you must master the correct installation method and installation position, so that the smart smoke and co detector can play a real role.